Map Network Shares

This feature creates a specific local drive letter for remote locations to save logs and other documents to, as well as provides a central location for documents to be stored.

Note:

Map Network Shares is very useful feature when running application under Boot Disk and in Batch Mode.

To map a network share:

  1. Open Mapping Dialog

    Navigate to File > Map Network Share... from the main menu.

  2. Configure Mapping

    Assign a drive letter, type a network folder location or click Browse button to browse local network and select a proper network share. If sharing policy requires, type user name and password:

    Figure 1: Mapping a Network Drive

    If you want to save configured mapping for future use, make sure Map automatically on program start up is marked.

    Note:

    Active@ KillDisk will identify all connected network drives, so you may use the drop-down list to select the one you'd like to use

  3. Attach a Network Share

    Click OK to attach a network share mapped to the local drive letter.

After your network drive is configured, you may select it as a destination for certificates and reports in Erase Certificate or Processing Report.